A refused state change is now remembered as owed and forced by every pass
until it lands, instead of recording the opposite state, which could hide
the next real boundary. Any refusal, in the rule rewrite or the state
change, pulls the slot in to a retry, and the slot is armed in a finally
so a throwing step can't leave it unarmed. The wake-up that ends the mode
is armed allow-while-idle (one such fire a night), so Do Not Disturb no
longer lingers into the morning behind a doze deferral.
The manifest filter for the access-changed broadcast is gone: the
platform only delivers it to runtime-registered receivers, and the
screen's resume check covers it. A backup written before bedtime existed
now keeps the current bedtime settings, and a restore goes through the
engine's own field comparison, so a reminder-only difference leaves a
hand-switched mode alone.
Refs #1
A bedtime before noon now belongs to the evening before, so Sunday to
Thursday nights at 00:30 run early Monday to early Friday, not Saturday
night through Wednesday night. Turning bedtime off clears the "last
applied" state only once the rule is really gone, so a refused removal
is retried instead of leaving Do Not Disturb on. Reopening the screen
after granting access elsewhere creates the rule even if the system's
broadcast never arrived. The empty-mask rule lives in one place.
Refs #1
Settings opens a rule's configuration activity with no action, only the
component and the rule id, so MainActivity now routes on the rule-id
extras. Each engine pass reads the clock once, so the mode's state and the
next slot can't disagree around a boundary, and non-edit passes switch the
mode only when the schedule crossed a boundary since Clockula last set it
(persisted), which also catches up a wake-up missed during a force stop
while leaving a mode switched on by hand alone. A reminder fire that also
ends a window now turns the mode off, and a reminder the schedule moved
away from is withdrawn.
The rule is only rewritten when a field it carries changes, and a rewrite
keeps the existing policy if it still allows alarms, so Android 10-14 no
longer loses the user's Do Not Disturb edits. The bedtime receiver, screen
and fallback alarm call are guarded, the boot-path resync runs even if an
earlier engine failed, and a backup with no nights restores every night.
Refs #1
Clockula can now turn on a Do Not Disturb mode of its own at bedtime and
off at the wake-up time, on the nights the user picks, with an optional
reminder before it starts. Digital Wellbeing's Bedtime mode can't be
driven by a third-party app, so this is a separate rule: a typed mode
with grayscale, dimmed wallpaper, dark theme and hidden always-on display
on Android 15+, and a plain DND schedule rule on Android 10-14.
The rule's policy always allows alarms (and media). BedtimeEngine owns one
AlarmManager slot of its own, on its own receiver and request code, and
every bedtime call on the boot, time-change and launch paths runs after
the alarm and timer passes, guarded. The rule id is never stored: the
platform lists an app's own rules, so restores and reinstalls find or
recreate it. Turning bedtime off removes the rule. The screen walks the
user through granting DND access and explains the Wellbeing overlap.
Settings are part of the JSON backup; older files restore bedtime as off.
Refs #1
A new setting in Settings > Alarms: while the ring screen shows, the
volume buttons change the volume (the default, and what they did
before), snooze, dismiss, or do nothing. It is app-wide, stored next to
the clock defaults, and included in the backup; a backup without it
restores "change the volume".
A press is made without looking, so VolumeButtonPolicy keeps it from
ending an alarm more finally than the ring screen would. Dismiss with a
dismiss challenge set snoozes instead, so the challenge still stands.
With no snoozes left, Snooze (and Dismiss behind a challenge) falls
back to changing the volume, never to the engine's refused-snooze path,
which dismisses. The key's snooze also asks the engine to keep ringing
if the limit turns out to be reached after all (AlarmEngine.snooze's new
dismissIfRefused). The ring screen decides whether a press is its own
on key down and keeps that for the release, leaves the keys alone once
another alarm has taken over the ring, and ignores a second snooze or
dismiss while the first is still running.
Only the ring screen handles the keys. While the ring is a heads-up over
another app, a background app gets no key events, and the one way
around that does not hold up: a remote-playback MediaSession whose
VolumeProvider takes the keys. On Android 13 and later
MediaSessionRecord.canHandleVolumeKey refuses such a session from an app
without a MediaRouter2 routing session, which Clockula's would be, so on
current Pixels the keys never reach it. Where it does work, it loses to
whatever app is in front or played last, shows a cast-volume slider and
a phantom media player, and takes media buttons while the alarm rings.
AOSP DeskClock and BlackyHawky's Clock also handle the keys in their
alarm activity only. ARCHITECTURE.md records the limitation.
Fixes#18
A stored value of 60 minutes or more now reads as Never, which rings that
long anyway. The picker no longer shows both "60 minutes" and "Never" for
the same window. Also drops a redundant null check in TimerRingPolicy.
Refs #17
Review fixes for the silence-after setting.
Changing the alarm's silence-after now re-measures a ring in progress at
once, through AlarmEngine.onSilenceAfterChanged: past the new window it
closes as missed, inside it the backstop moves. onAutoSilence also re-arms
instead of closing a ring that is still inside the current window, so a
backstop armed for a shorter window cannot end a ring early.
A cycle the resolver closes as missed (a ring past its window, or a
snooze that never fired) now disables a one-shot alarm, as the engine's
own close does. A short window made that path much easier to reach, and
the alarm was being armed for the same time the next day.
A late snooze is kept for the window or ten minutes, whichever is longer,
so a short window never makes a promised snooze easier to lose than in v1.
A timer that has gone quiet stays quiet when the setting is raised: the
lapsed anchor moves back past the hard stop. The timer's heads-up is now
keyed to the session anchor rather than the window's end, so editing the
setting mid-ring no longer counts as a new session and alerts again.
A negative stored value now reads as the default instead of Never. The
picker offers a stored value that matches no choice, and the wake-lock
timeout is one shared constant.
Refs #17
A ringing alarm and a finished timer used to stop after a fixed ten
minutes. Settings > Alarms and Settings > Timers now each have a "Silence
after" row with Google Clock's choices: 1, 5, 10, 15, 20 or 25 minutes,
or Never. Ten minutes stays the default, so nothing changes on upgrade.
The value is app-wide; a per-alarm override would need a new column, a
migration and an editor row, and is left out.
"Never" rings for an hour, then stops. The backstop is also what keeps a
phone left at home from ringing its battery flat, what bounds the ring
services' wake locks, and what stops a reboot hours later from resuming a
ring nobody was there for. A truly unbounded ring would give all of that
up, so Never maps to a one-hour hard stop, longer than any finite choice,
and the settings hint says so. Stored values clamp to 0..60 on read, on
write and from a backup.
The window is read everywhere the fixed constant was: the resolver's
ringing and late-snooze checks (which now take it without a default), the
backstop onFire arms, how late a snooze fire may arrive, whether an
interrupted ring is resumed after a reboot, upcoming(), the timer ring
policy, the lapsed-session check and the timer ring screen. Both ring
services' wake-lock timeouts now derive from the hard stop instead of a
hard-coded fifteen minutes.
When the resolver closes a ring (the window was shortened mid-ring, the
clock jumped, the alarm was switched off), the engine now also stops the
ring service and cancels the backstop. Before, it only cleared
ringingSince and left the sound to a backstop armed for the old window.
Both values are backed up as default_alarm_silence_after_minutes and
default_timer_silence_after_minutes; a file without them imports as ten
minutes.
Fixes#17
A backup without the timer_presets field decoded it as an empty list,
which means "the user removed them all", so restoring it wiped the
built-in presets. A missing field now keeps them. BACKUP.md describes
this and the per-alarm clamps.
Removes AI-writing patterns across the docs, store listing and
templates: dash-heavy rhythm, not-X-but-Y contrasts, one-line kickers
and decorative bold. Facts, code, links and headings are unchanged.
Also fixes leftovers copied from the sibling apps: the crash report
template promised "no calendar content", and CONTRIBUTING described
Agendula's task-provider layout, test seams and commit style.
Settings > Timers offered a "Default duration", but nothing that creates
a timer ever read it: the keypad starts empty. The row, its preference,
ClockDefaults.timerDuration and the backup field are gone, and the
screen's hint and the hub's subtitle now only speak of the sound.
Backups no longer write default_timer_duration_millis. Older files that
carry it still import, since the codec ignores unknown keys.
Closes#5
clockula-backup-v1.json, schema documented in docs/BACKUP.md per
PLAN.md §7: alarms, timers and world clocks as configuration only —
ring state and a timer's running anchors never leave the device, since
neither means anything on another one. Unknown fields are ignored at
any level; a malformed known field rejects the whole file rather than
importing it half-way.
Import is whole-state replacement, not a merge, and the backup screen
says so before the user confirms. Before replacing: a ringing alarm is
dismissed and every running timer is deleted, so the import can never
strand a live ring session; after it, AlarmEngine and TimerEngine are
told to re-resolve so the imported state is live immediately.
BackupDao adds delete-all/insert-many queries under one transaction —
no schema or version change, queries only.
makiolaj