The countdown used the stock Material snackbar, while Agendula and
Calendula confirm with floret-kit's SnackChip. It now opens as that chip:
bottom-start in the FAB's band on the list, ellipsising short of the FAB,
and in the editor's snackbar slot so it follows the predictive-back
preview. It fills the band's height, as an Undo chip does in the other
apps, and sits on the secondary container to stand apart from the cards.
The chip has no timer, so AlarmSetChipBand holds it for a short
snackbar's four seconds, stretched as the accessibility settings ask.
The hand-over is unchanged: a chip cut short stays pending for the next
resumed screen.
Beside the FAB there is room for about 308 dp, so the message is now
"Alarm in 7 hours and 12 minutes" rather than "Alarm set for … from now",
which would have lost its number to the ellipsis.
Refs #19
A refused state change is now remembered as owed and forced by every pass
until it lands, instead of recording the opposite state, which could hide
the next real boundary. Any refusal, in the rule rewrite or the state
change, pulls the slot in to a retry, and the slot is armed in a finally
so a throwing step can't leave it unarmed. The wake-up that ends the mode
is armed allow-while-idle (one such fire a night), so Do Not Disturb no
longer lingers into the morning behind a doze deferral.
The manifest filter for the access-changed broadcast is gone: the
platform only delivers it to runtime-registered receivers, and the
screen's resume check covers it. A backup written before bedtime existed
now keeps the current bedtime settings, and a restore goes through the
engine's own field comparison, so a reminder-only difference leaves a
hand-switched mode alone.
Refs #1
A removal the system refuses while turning bedtime off now keeps the slot
armed fifteen minutes out as its retry, instead of cancelling it and
leaving Do Not Disturb on until some unrelated launch. A refused state
change records the opposite state so the next pass retries it, and a
rule that was rewritten (which clears its condition on Android 10-14) is
switched regardless. A refused rewrite is remembered and retried by every
pass until it lands, rather than resting on the one edit that asked.
Refs #1
Without exact-alarm access the slot falls back to a ten-minute window
instead of plain set(), whose slack could end an eight-hour night hours
late. A freshly opened bedtime screen reads whether bedtime is on from the
store, not from its still-loading state, so access granted while the
screen was closed creates the rule. A restore that rolled back no longer
forces the mode.
Refs #1
Android rations allow-while-idle wake-ups per app in doze, and the timer's
expiry slot and the alarm's fallback share that ration, so a 07:00
wake-up fire could hold back a timer due at 07:04. The bedtime slot is
now a plain exact alarm that doze may defer, which can move a mode
boundary but never a ring. A restore of unchanged bedtime settings no
longer forces the mode, and the screen skips its rule check while bedtime
is off.
Refs #1
Only a bedtime before 06:00 now counts as the small hours after the
chosen evening, so a day sleeper's 08:00 bedtime runs on the days picked.
A rule whose removal was refused while turning bedtime off in the daytime
is removed by the next pass, and a restored reminder length the picker
doesn't offer stays choosable.
Refs #1
A bedtime before noon now belongs to the evening before, so Sunday to
Thursday nights at 00:30 run early Monday to early Friday, not Saturday
night through Wednesday night. Turning bedtime off clears the "last
applied" state only once the rule is really gone, so a refused removal
is retried instead of leaving Do Not Disturb on. Reopening the screen
after granting access elsewhere creates the rule even if the system's
broadcast never arrived. The empty-mask rule lives in one place.
Refs #1
Whether the wake time is the same night or the next morning is now
decided on the local times, so a bedtime in a spring-forward gap no
longer turns a 45-minute window into a day-long one. Screen edits start
undispatched so they reach the engine's lock in the order they were made,
and an edit that rewrites the rule also re-asserts the mode, in case the
platform reset its state.
The launch-time bedtime pass runs even if an earlier engine pass failed,
a restore that never applied settings no longer forces the mode, and a
user who never turned bedtime on pays nothing for it at launch or boot.
The screen says when equal bedtime and wake-up times mean it never starts.
Refs #1
A rule recreated by a pass (deleted in Settings, access re-granted) now
gets its state set even when no boundary was crossed, and the applied
state is recorded only once the system accepted it. Edits that can't move
a boundary (reminder, effects) no longer re-assert the mode over a manual
override, and the screen's writes run on the application scope so leaving
right after a change can't cut it short. A late reminder counts the
minutes actually left, and one slot fire reads the zone once.
An equal bedtime and wake time is now no window instead of a day-long one,
which on every night meant Do Not Disturb never ended, and an empty days
mask in prefs reads as every night, as a backup's does. The rule-id extras
are translated to the bedtime action in MainActivity, keeping the routing
table keyed on the action alone.
Refs #1
Settings opens a rule's configuration activity with no action, only the
component and the rule id, so MainActivity now routes on the rule-id
extras. Each engine pass reads the clock once, so the mode's state and the
next slot can't disagree around a boundary, and non-edit passes switch the
mode only when the schedule crossed a boundary since Clockula last set it
(persisted), which also catches up a wake-up missed during a force stop
while leaving a mode switched on by hand alone. A reminder fire that also
ends a window now turns the mode off, and a reminder the schedule moved
away from is withdrawn.
The rule is only rewritten when a field it carries changes, and a rewrite
keeps the existing policy if it still allows alarms, so Android 10-14 no
longer loses the user's Do Not Disturb edits. The bedtime receiver, screen
and fallback alarm call are guarded, the boot-path resync runs even if an
earlier engine failed, and a backup with no nights restores every night.
Refs #1
Picking "Timer expired" as the default alarm or timer sound showed "Custom" in Settings, because the summary knew only the device default and silence. It now names the bundled sound, as the editors already do.
ARCHITECTURE.md now names the exact bundled sentinel instead of a prefix the code does not recognise, lists clockula://media values in the alarm column, gives the timer column the same values, and says RingtoneCatalog lists the bundled sounds too.
Refs #14
Clockula can now turn on a Do Not Disturb mode of its own at bedtime and
off at the wake-up time, on the nights the user picks, with an optional
reminder before it starts. Digital Wellbeing's Bedtime mode can't be
driven by a third-party app, so this is a separate rule: a typed mode
with grayscale, dimmed wallpaper, dark theme and hidden always-on display
on Android 15+, and a plain DND schedule rule on Android 10-14.
The rule's policy always allows alarms (and media). BedtimeEngine owns one
AlarmManager slot of its own, on its own receiver and request code, and
every bedtime call on the boot, time-change and launch paths runs after
the alarm and timer passes, guarded. The rule id is never stored: the
platform lists an app's own rules, so restores and reinstalls find or
recreate it. Turning bedtime off removes the rule. The screen walks the
user through granting DND access and explains the Wellbeing overlap.
Settings are part of the JSON backup; older files restore bedtime as off.
Refs #1
ARCHITECTURE.md still said every non-silent ringtone_uri is a content URI and listed the picker's rows without the bundled "Timer expired" sound, so a reader could Uri.parse the clockula://tone/ sentinel directly. It now names the sentinel, BundledTones as its only resolver, and where the tone sits in the picker.
A view-model test now covers a device whose only listed tone is the bundled one, which must still show the "no alarm sounds" banner. The existing test only checked an empty list, so it passed even if the bundled tone were counted as a device sound.
Refs #14
Keep §5's own claim that only crash reports leave the phone, say the
dependency would ship in every channel, and keep the standalone app's
distribution caveat.
Refs #27
AlarmClock intents only reach apps on the same device and can't read
state, so they are no route for a watch. Cite PRIVACY.md §4 and §5
together and say "no product flavours" precisely.
Refs #27
Cite PRIVACY.md's own wording, name F-Droid's non-free-dependency rule,
and note that third-party watch apps can already drive Clockula through
the AlarmClock intents.
Refs #27
PRIVACY.md already documents Auto Backup and crash reports as ways data
can leave the phone, and there is a single build rather than an F-Droid
one. Say that, and call the entry blocked rather than unscoped.
Refs #27
Any phone-to-watch channel sends data off the phone, which the privacy
policy rules out today, so the entry now states that decision and the
standalone alternative without speculating about notification bridging.
Refs #27
A new setting in Settings > Alarms: while the ring screen shows, the
volume buttons change the volume (the default, and what they did
before), snooze, dismiss, or do nothing. It is app-wide, stored next to
the clock defaults, and included in the backup; a backup without it
restores "change the volume".
A press is made without looking, so VolumeButtonPolicy keeps it from
ending an alarm more finally than the ring screen would. Dismiss with a
dismiss challenge set snoozes instead, so the challenge still stands.
With no snoozes left, Snooze (and Dismiss behind a challenge) falls
back to changing the volume, never to the engine's refused-snooze path,
which dismisses. The key's snooze also asks the engine to keep ringing
if the limit turns out to be reached after all (AlarmEngine.snooze's new
dismissIfRefused). The ring screen decides whether a press is its own
on key down and keeps that for the release, leaves the keys alone once
another alarm has taken over the ring, and ignores a second snooze or
dismiss while the first is still running.
Only the ring screen handles the keys. While the ring is a heads-up over
another app, a background app gets no key events, and the one way
around that does not hold up: a remote-playback MediaSession whose
VolumeProvider takes the keys. On Android 13 and later
MediaSessionRecord.canHandleVolumeKey refuses such a session from an app
without a MediaRouter2 routing session, which Clockula's would be, so on
current Pixels the keys never reach it. Where it does work, it loses to
whatever app is in front or played last, shows a cast-volume slider and
a phantom media player, and takes media buttons while the alarm rings.
AOSP DeskClock and BlackyHawky's Clock also handle the keys in their
alarm activity only. ARCHITECTURE.md records the limitation.
Fixes#18
Ringing notifications are foreground-service notifications, so making
them non-ongoing wouldn't bridge them; CompanionDeviceManager carries no
data; and watches pair through their makers' apps. Say only what holds
and note that a watch build has no F-Droid channel.
Refs #27
Ring and timer notifications are ongoing, which Wear OS doesn't bridge,
and bridging needs Google's Wear OS app anyway. Quote the privacy policy
exactly, drop the unchecked "only channel" claim, and list bridging the
ring as an option of its own.
Refs #27
A companion needs Google's Wearable Data Layer, which is a proprietary
service the privacy policy and the F-Droid build rule out. The roadmap
entry now records that constraint, what the bridged notifications
already give a watch, and the options if it is picked up.
Refs #27
The settings screen Android's screen saver list opens gets a task of its
own and stays out of recents, so it never lands in or clears the app's
task, and its bars follow the app's theme. The on-demand screen saver is
noHistory, so leaving it by Home does not bring the app back to it later,
and it only touches the keep-screen-on flag when charging starts or stops.
The next-alarm line uses the same 12/24-hour rule as the big readout,
joined to the day by a translatable string; the minute's crossfade shows
the old minute fading out rather than two copies of the new one.
The notice is local-only, so its Dismiss is never bridged to a watch where the phone's unlock does not apply. The closing and skip-spending checks land a second past the fire grace, since onFire still accepts a fire at exactly the grace.
Fixes#16
The list and editor now format a date through the same helper as the
widget, and the date pickers keep their default years unless a stored
date lies beyond them, instead of always spanning to 9999.
The upcoming check that spends a skip dismissed in advance now wakes once the skipped occurrence's fire grace is over rather than at the occurrence itself, so it can never get ahead of a fire still in flight for it.
Fixes#16
A dated one-shot whose time was moved later while it was snoozed rang a
second time that day, because closing the cycle only asked whether the
date was still ahead. It now keeps the alarm on only for a date after the
day that rang, and a one-shot switched off as its cycle closes lets its
date go.
The date pickers accept every year a stored date can have, so a far date
from a backup can no longer crash the editor. The widget formats its date
with the list's own formatter, and a backup's leftover date on the wrong
kind of alarm is ignored instead of rejecting the file.
Keeping a skip armed through its fire grace let the editor's switch or another dismissal inside those two minutes ring the skipped alarm late, or be absorbed. The resolver goes back to spending the skip at its occurrence and recording it as handled, and the upcoming check wakes at an armed skip's occurrence so the list stops saying "skipping next" on time.
Fixes#16
A DreamService shows a full-screen clock, the date and the next alarm,
digital or as the world clock's analog face, on black. Night mode dims
every colour towards black and turns the display down; the clock moves
to a new spot each minute so nothing burns in. It wakes only on the
minute and on a time, zone or 12/24-hour change.
The tabs' settings gear becomes an overflow menu with "Screen saver" and
"Settings". An app cannot start the system's dream without a system
permission, so that item opens an activity with the same content, which
keeps the screen on only while charging. Style and night mode live in
Settings > Clock and in the dream's own settings screen, and are carried
in backups; older backups restore the defaults.
Fixes#25
The resolver now keeps a skip armed until its occurrence is out of the fire grace too, so a reschedule in those two minutes cannot spend it early and let a fire already in flight ring the dismissed alarm; onFire refuses that fire by the armed watermark. The notifier also cancels notices it posted itself, which the platform may not list as active yet.
Fixes#16
"Paused, back on" named the day after the pause, which for a weekday
alarm can be a Saturday it never rings on. A pause under way now reads
"Paused through Wed, Oct 28".
Picking a date on a switched-off alarm switches it on, the pause picker
cannot confirm a range that is already over, a spent pause stored with
its ends reversed is cleared too, and the widget formats its date in the
app's own locale.
The upcoming check now also wakes once a noticed occurrence's fire grace has run out, so a notice cannot outlive a late fire, and once an armed skip's has, so the list stops saying "skipping next" about an occurrence already gone. onFire is back to checking only the armed skip: the resolver deliberately re-arms a handled occurrence that a clock moved backwards put back in the future, and that one must ring.
Fixes#16
The previous rule named every non-place id by its current offset, which
renamed legacy ids such as Japan, called Etc/UTC "GMT" and made a CET
row's name change at DST. Only the Etc/GMT+-n ids have a misleading
last segment, so ZoneCatalog.cityFallbackFor now flips just those to
their real offset. That also reaches the zone picker's device row,
which takes its name from the same fallback.
Moving the time or changing the days left a pending skip pointing at the
old sequence, so the skipped day could ring at its new time. Every editor
change that can move a fire time now re-arms the skip.
A pause under way now reads "Paused, back on Thu, Oct 29" instead of
naming its last day, which read as the day it ends before. Reopening a
begun pause keeps its start, the date pickers take their bounds from the
clock when they open, and the dismiss chooser shows the scheduled date and
pause like the list does.
The Dismiss action's unlock requirement is honoured only from Android 12, so on 10 and 11 the notice is now secret on the secure lock screen rather than dismissible by whoever holds the phone.
Fixes#16
The Etc/GMT-n naming fix only covered the local row. A home that
follows a device set by UTC offset still put "GMT-9" under a UTC+9
face. The rule now lives in the one place every row and the face take
their city from.
makiolaj