Issue #12 asks for hiding finished events in the agenda view *and* its
home-screen widget. The in-app screen already honours the Past events
setting (Show / Dim / Hide); extend the same setting to the "Upcoming"
agenda widget.
The widget loads its events unfiltered and applies the mode reactively in
the composition against a captured "now" — mirroring how the range is read
from per-instance Glance state — so toggling the setting reflects on a live
widget without relying on provideGlance's data preamble re-running. Hiding
drops finished events and any day they empty; dimming fades the colour
stripe and lowers the title's emphasis (Glance has no generic alpha
modifier). setPastEventDisplay now pushes the mode into each widget's Glance
state and recomposes, like setAgendaWidgetRange.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump versionName to 2.12.0 (versionCode 21200) and add the changelog.
Merging this into main triggers release.yaml, which builds, signs,
publishes and mints the v2.12.0 tag + Gitea release.
Closes #13
Overlapping events split a day column into narrow lanes where the title
was clipped to one or two characters. Mirror Google Calendar: drop the
time label on overlapping (multi-lane) blocks and wrap the title across
as many lines as the block height allows, so the full title stays
readable without opening the event.
Closes #13
Adds two independent display settings under Settings › Appearance, both
defaulting to the current behaviour (off) so nothing changes until a user
opts in:
• Agenda › "Past events" (Show / Dim / Hide) — events that already ended
today can be left as-is, faded, or dropped from the list. Hiding also
removes any day left empty, falling back to the empty state. Re-evaluated
each minute so rows fade/fall away as they end while the screen is open.
• Calendar › "Dim completed events" — a separate toggle that fades finished
events in the month and week grids, kept independent of the agenda setting.
An event counts as completed once its end is at or before now (in-progress
events are never dimmed; all-day events only after their day is fully over),
via a shared EventInstance.hasEnded(now). The grids read the cut-off through
a new LocalDimCutoff CompositionLocal (mirroring LocalShowHourLines) so only
the event chips recompose on the per-minute tick, and only while dimming is on.
Also adds an "Agenda" section header so the agenda rows stand apart in the
now-busier Appearance screen, and documents the feature in the changelog.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Opening the new-event form now puts the cursor in the title field and raises the
keyboard, so the user can type the name straight away instead of tapping the
field first (issue #10). On by default — most events get a title — with a new
"Focus title on new event" switch in Settings → New event form to turn it off.
Only the create form auto-focuses: editing an existing event and opening a
prefilled/imported form never grab focus (guarded by !isEditing && title blank).
- SettingsPrefs: autofocusEventTitle (booleanPreferencesKey), default true.
- Plumbed through SettingsViewModel/UiState (settings switch) and
EventEditViewModel/UiState (read by the form).
- EventEditScreen: a FocusRequester on the title InlineField, requested once per
open from a LaunchedEffect when the guard holds.
- Strings (en + de), unit test for the new pref default/round-trip.
Bumps to 2.11.2.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Calendula didn't declare the intent filters launchers and the system use for
calendar actions, so it never appeared in the "default calendar app" chooser —
on every platform, not just GrapheneOS (issue #9). Android exposes no API for an
app to set itself default, so registering these filters is the only way users can
pick it from the system picker.
Adds to MainActivity:
- MAIN + APP_CALENDAR — the "open the calendar app" action the OS/launchers use.
- VIEW on content://com.android.calendar/time/<epochMillis> and the time/epoch
mime type — a launcher/clock date tap. The provider's time Uri is parsed into a
LocalDate and opened on the day view, rooted over the default home view (a new
sourceless WidgetNavRequest.OpenDate). The .ics import path now ignores the
calendar provider host so a date tap isn't mistaken for a file to import.
Bumps to 2.11.1.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Per review, it shouldn't be a top-level Settings entry: the "Help translate"
link now sits at the top of the full-screen App language picker (OptionPicker
gains an optional header slot). Updated README + changelog wording to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Invite community translations: a new Settings > Help translate row (next to
App language) opens the project's Weblate engage page, plus a Translations
section in the README. Documented in the 2.11.0 changelog.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Turning automatic backup off only cancelled the periodic work, so a
run-now that kept failing (e.g. its folder was deleted) retried forever
and spammed failure notifications.
- Cancel the immediate "run now" work too when backup is disabled.
- Worker no-ops (no retry) when the toggle is off, so already-queued work
can't revive itself.
- Reconcile scheduled work against saved settings on every app launch —
re-arms after a reinstall and clears orphaned work once backup is off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Scheduled one-way export of local calendars to a user-chosen folder,
overwriting calendula-backup.ics each run — the manual backup, automated.
Not a sync; stays INTERNET-free (provider reads + local file write).
- WorkManager periodic job (deps: work-runtime-ktx, documentfile); worker
pulls collaborators via a Hilt @EntryPoint, so no custom WorkerFactory
wiring. First periodic run is delayed one interval so it can't race the
immediate "run now" feedback run; the writer also overwrites the canonical
file and cleans up any "(1)" duplicates from earlier races.
- SettingsPrefs: enabled, interval (minutes, floored at 30), folder Uri,
last-run status; persisted SAF write grant.
- UI in Calendars > Backup: toggle, folder picker, amount+unit interval
dialog, last-run status line. Notifies after repeated failures.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the per-account toggle switch and nested manage row with a single
trailing overflow (⋮) menu holding both account-level actions:
- "Enable all" / "Disable all" — toggle every calendar in the group
- "Manage in app" (synced) / "Add calendar" (local)
The dropdown is styled to fit: rounded corners, a distinct floating
surface (surfaceContainerLowest + lifted shadow) so it stands clear of
the cards, and a divider separating the two actions. Shortened the manage
label to "Manage in app" and dropped the now-unused account a11y strings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Settings:
- Event-form field rows show each field's own icon (shared
EventFormFieldVisuals, reused by the editor and settings)
- Move "Add Quick Settings tile" to a top-level Settings hub row
- Notifications: reliable-delivery + snooze moved above the
per-calendar block, which now folds behind one expandable section
Calendars manager:
- Local and synced calendars now use one collapsible group card
- Source-branded headers: each account shows its app's launcher icon
(Google Calendar, DAVx5, …) loaded from PackageManager; local shows
a device chip
- Per-account toggle-all switch (CalendarsViewModel.setAccountDisabled)
- Management action ("Add calendar" / "Manage in app") is a nested row
inside the expanded group; removed the dead "Add account" row
- A fully deactivated account dims its header, not just the switch
- Group headers use the normal row colour; their options sit one tone
darker (GroupedRow gains an optional container colour)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The agenda widget loaded and sliced its data in the provideGlance preamble
and captured it as a non-reactive local. updateAll() reliably recomposes a
live Glance session but does not reliably re-run that preamble, so a range
change was redrawn against the stale slice (intermittently — only when no
session was alive did it pick up the new range). This is the same platform
limitation the month widget already works around.
Mirror that pattern: load the widest selectable window once, store the range
in per-instance Glance state (AGENDA_RANGE_KEY), read it reactively via
currentState, and slice in the composition. The settings setter writes the
state into each instance and recomposes, so a range change now reflects via
plain recomposition regardless of session lifecycle.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The debounced observer was unreliable: drop(1) plus the ViewModel lifecycle
could swallow a change after re-entering the app, so a single range change
sometimes didn't refresh the widget. Refresh directly from the settings
setters instead (always fires on a real change), serialized through a mutex
so a rapid flip-and-flip-back can't run two updateAll calls at once and
strand the widget on the intermediate value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refreshing the widget directly from the setter raced when a setting was
flipped and flipped back quickly: two concurrent updateAll calls could
coalesce around a stale read and leave the widget on the intermediate value.
Observe the agenda-widget-range and week-start prefs instead and push a
single debounced updateAll once changes settle, so the widget always
converges to the final value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The agenda widget only re-read agendaWidgetRange on the next data-change /
midnight / periodic refresh (or re-placement), so a settings change appeared
to do nothing until then. Push an updateAll from the settings setters:
the agenda widget on an agenda-widget-range change, and both widgets on a
week-start change (month weekday header + the agenda widget's "this week").
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Consolidate the separate "range title" and "range button" settings into a
single "Range bar" toggle, now that the header and switcher live on one bar.
On by default.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Move the session range pill from the bottom-left corner onto the same top
bar as the "Showing all upcoming events for …" header — header on the left,
pill on the right, each still independently toggleable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reword the range header to "Showing all upcoming events for". Replace the
dry empty state ("Nothing scheduled" + subtitle) with a single warmer line
("You're all caught up"), drop the subtitle, and switch the icon to a
coffee cup. The empty title is shared with the agenda widget.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Move the "Showing all events for <window>" line out of the picker and into
the agenda view as an always-visible header above the list. Add two
settings (Agenda group, both ON by default) to toggle the range header
banner and the bottom-left range pill independently. The picker keeps its
two-list grouping but no longer carries the header.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Group the range options into calendar-aligned (today / this week / this
month) and rolling (next 7 / 30 days / custom) lists. Add a header showing
the concrete span currently in effect — a single date for Today, the month
and year for This month, otherwise a start–end span — so it's clear what
the agenda is showing. The header appears only where a window is supplied
(the agenda pill), not in Settings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a tonal pill in the agenda's bottom-left corner showing the current
range; tapping it opens the existing AgendaRangePicker as a session-only
override. The override lives in AgendaViewModel (in-memory), so it survives
view switches and rotation but resets to the saved default when the app is
relaunched. The pill fills with the primary container while an override is
active, and a hint in the picker spells out the temporary nature.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Drop the uniform two-per-card grouping for meaningful sections: theme &
colour (2), calendar — default view, week start, time format, hour lines
(4), and agenda (2).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Integrate #3/#5/#6 (week-start, time-format, hour-lines) into the agenda
range branch. SettingsViewModel folds all five view prefs into one combine;
WidgetData keeps the range-based window and adds the resolved is24Hour.
Also, in the same Appearance section:
- regroup the rows into four titled-by-spacing groups (theme & colour /
calendar layout / timeline display / agenda) instead of one long card.
- add an explanatory description line under the title of each agenda-range
picker (PickerDescription).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bump versionName to 2.11.0 (versionCode 21100) and add the 2.11.0
changelog: any-day week start (#3), 12/24-hour time format (#6),
optional timeline hour lines (#5), and agenda range limits (#4).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Extend AgendaRange with calendar-aligned windows alongside the rolling
ones: ThisWeek runs through the end of the current week (respecting the
week-start preference — a Monday start means everything before next
Monday), ThisMonth through the last day of the current month. dayCount now
takes the anchor day and week-start; the agenda screen and widget resolve
the week-start preference and pass it through. Rolling options relabelled
("Today", "Next 7 days", "Next 30 days") to read distinctly from the new
calendar-aligned ones.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add independent agendaScreenRange and agendaWidgetRange preferences, each a
rolling window: 1 day / 1 week / 1 month / custom 1–365 days (default Month).
Rolling (not calendar-aligned) so the span never degenerates near a period
boundary. The in-app Agenda screen and the agenda widget each read their own
setting, configured via a new AgendaRangePicker with an inline custom-days
editor.
Closes #4 (Codeberg)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a showHourLines preference (default off — the existing clean look).
When on, the week and day timelines draw a faint outline-variant line at
each hour boundary, sitting over the column background but beneath event
blocks. The toggle is provided app-wide via LocalShowHourLines and applied
through a reusable hourSeparatorLines() modifier.
Closes #5 (Codeberg)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a TimeFormatPref (Auto/12h/24h) preference. Auto follows the device's
24-hour system setting; the others force a clock app-wide. The resolved
convention is provided once at the app root via LocalUse24HourFormat, so
every in-app time label reads it without per-screen plumbing.
A shared, pure TimeFormat helper (formatTimeOfDay / formatMinuteOfDay /
formatHourLabel / timeOfDayFormatter) is now the single source for all
time-of-day rendering. Routing every site through it also fixes a
pre-existing inconsistency: the week/day timeline gutters and the agenda
screen + widget hard-coded 24h, while event detail/edit/search/reminders
followed the locale — so a 12h-locale user previously saw mixed formats.
Covered: week & day timelines (gutter + event blocks), agenda screen and
widget, event detail/edit, search, and reminder notifications.
Closes #6 (Codeberg)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the AUTO/MONDAY/SUNDAY week-start enum with a sealed type
(Auto + Day(DayOfWeek)) so users can pick any of the seven days as the
first day of the week. The picker now lists "Automatic" plus all seven
localised weekday names; labels come from java.time display names rather
than per-day string resources.
Stored values round-trip by DayOfWeek.name, so the legacy MONDAY/SUNDAY
preferences migrate transparently. Garbage values fall back to Auto.
Closes #3 (Codeberg)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
